For use with WILO Stratos and Infrared Module

Functional - IF Modules (Inter Face)
Fits all Stratos Models - Simple Field Installation Possible
 
External Min/0 - 10 Vdc/DP
0 - 10 Volt DC External Input
- Sets either pump speed or head set point (overrides electronic control)
- Input resistance greater than 100k Ohm, Dielectric strength 24 V, Accuracy +/-5%
External Minimum - potential free open terminals (jumper included)
- Close circuit normal operation - pen contact pump runs at min speed
- Max contact load 24 Vdc/10mA, dielectric strength 250 Vac
DP double pump terminals - hook up second (slave) pump
 
External OFF/0 - 10 VDC/DP
0 - 10 Volt DC External Input
- Sets ether pump speed or head set point (overrides eletronic control)
- Input resistance greater than 100k Ohm, Dielectric strength 24 V, Accuracy +/-5%
External Off - potential free normally open input terminals (jmper included)
- Closed circuit normal operation - open contact stops power to motor, drive stay active
- Pump exercises every 24 hours - no need for additional relays
- Max contact lod 24 VDC/10mA, Dielectric strength 250 Vac
DP double pump terminals - hook up second (slave) pump
 
LON/DP
- LON interface for LonWorks BMS building automations - FTT 10 A - LONTALK
- DP ouble pump ermials - hook up second (slave) pump